(2.57mb)

(891kb)

Pall, A., Pall, R., "Performance Based Design Using Pall Friction Dampers - An Economical Design Solution", Proceedings, Thirteenth World Conference on Earthquake Engineering, Vancouver, 2004. Paper #1955. (310kb)

Vail, C., Hubbbell., O'Connor, B., King, J., Pall, A., "Seismic Upgrade of Boeing Commercial Airplane Factory at Everett, WA", Proceedings, Thirteenth World Conference on Earthquake Engineering, Vancouver, 2004. Paper #3207. (267kb)

Pasquin, C., Leboeuf, N., Pall, R., "Friction Dampers for Seismic Rehabilitation of Eaton's Building, Montreal", Proceedings, Thirteenth World Conference on Earthquake Engineering, Vancouver, 2004. Paper #1949. (338kb)

Vezina, S., Pall, R., "Seismic Retrofit of MUCTC Building Using Friction Dampers, Palais Des Congres, Montreal", Proceedings, Thirteenth World Conference on Earthquake Engineering, Vancouver, 2004. Paper #1946. (208kb)

Malhotra, A., Carson, D., Pall, R., "Friction Dampers for Seismic Upgrade of St. Vincent Hospital, Ottawa", Proceedings, Thirteenth World Conference on Earthquake Engineering, Vancouver, 2004. Paper #1952. (167kb)

Soli, B., Baerwald, D., Krebs, P., Pall, R., "Seismic Control of ACC Sharp Memorial Hospital, San Diego, CA", Proceedings, Thirteenth World Conference on Earthquake Engineering, Vancouver, 2004. Paper #1953. (196kb)

Verganelakis, V., Pall, R., "Hightech Seismic Design of Le Nouvel Europa, Montreal", Proceedings, Thirteenth World Conference on Earthquake Engineering, Vancouver, 2004. Paper #2014. (216kb)

Sundararaj, R., Pall, R., "Seismic Control of Federal Electronics Research Building, Ottawa", Proceedings, Thirteenth World Conference on Earthquake Engineering, Vancouver, 2004. Paper #2016. (127kb)

Swanson, D., Falkin, B., Yamatsuka, K., "Use of Friction Dampers in Elevated Water Tanks", Proceedings, Thirteenth World Conference on Earthquake Engineering, Vancouver, 2004. Paper #1011. (134kb) 

Pasquin, C., Leboeauf, N., Pall, R., (2002) "Friction Dampers for Seismic Rehabilitation of Eaton Building, Montreal", Proceedings, CSCE Conference, Montreal(527kb)

Vezina, S., Assaad, L., Pall, R., (2002) "Seismic Retrofit of MUCTC Buiding, Palais des Congres, Montreal", Proceedings, CSCE Conference, Montreal.

Vail, C., Hubbell, J., (2002) "Structural Upgrade of Boeing Commercial Airplane Factory at Everett, WA", Proceedings, Applied Technology Council (ATC 17-2), Seminar on Response Modification Technologies for Performance-Based Seismic Design, Los Angeles. (856kb)

Pall, A., Gauthier, G., Delisle, S., Pall, R., (2000) "Friction Dampers for Seismic Upgrade of Quebec Police Headquarters, Montreal", Proceedings, Twelfth World Conference on Earthquake Engineering, Auckland, NZ. Paper No. 2014.

Balazic, J., Guruswamy, G., Elliot, J., Pall, R., Pall, A., (2000) "Seismic Rehabilitation of Justice Headquarters Building, Ottawa, Canada", Proceedings, Twelfth World Conference on Earthquake Engineering, Auckland, Paper No. 2011. (576kb)

Chandra, R., Masand, M., Nandi, S., Tripathi, C., Pall, R., Pall, A., (2000), "Friction Dampers for Seismic Control of La Gardenia Towers, South City, India", Proceedings, Twelfth World Conference on Earthquake Engineering, Auckland, NZ. Paper No. 2008.(489kb)

Hale, T., Pall, R., (2000), "Seismic Upgrade of the Freeport Water Reservoir, Sacramento, California", Proceedings, Twelfth World Conference on Earthquake Engineering, Auckland, NZ. Paper No. 269.(122kb)

Pasquin, C.,Leboeauf, N., Pall, R., Pall, A., (1999), "Seismic Rehabilitation of Hotel Dieu Hospital, Sainte Hyacinthe, Quebec", Proceedings, Eighth Canadian Conference on Earthquake Engineering, Vancouver, pp. 573-578.

Pasquin, C., Charania, H., Steele, R., Pall, R., Pall, A.S., (1998), "Friction Dampers for Seismic Control of Selkirk Waterfront Offices, Victoria", Sixth U.S. National Conference on Earthquake Engineering, Seattle.

Elliot, J., McCaffrey., Guruswami, G., Pall, R., Pall, A., (1998), "High-Tech Seismic Rehabilitation of Justice Headquarters Building, Ottawa", Proceedings, Structural Engineers World Congress, San Francisco, Paper No. T189-3

Deslaurier, F., Pall, A., Pall, R., (1997), "Seismic Rehabilitation of Federal Building, Sherbrooke", Proceedings, Canadian Society of Civil Engineers, Annual Conference, Sherbrooke, Vol. 4, pp. 339-348.

Pall, A.S., Pall, R., (1996), "Friction Dampers for Seismic Control of Buildings - A Canadian Experience", Proc. Eleventh World Conference on Earthquake Engineering, Acapulco, Mexico. Paper No. 497.

Hale, T. H., Tokas, C. V., Pall, A. S., (1 99 5), "Seismic Retrofit of Elevated Water Tanks at the University of California, Davis", Proceedings, Seventh Canadian Conference on Earthquake Engineering, Montreal, pp. 959-966.

Savard, G., Lalancette, J.-R., Pall, R., Pall, A., (1995), "Hi-Tech Aseismic Design of Maison 1 McGill", Proceedings, Seventh Canadian Conference on Earthquake Engineering, Montreal, pp. 935-942.

Pasquin, C., Pall, A., Pall, R., (1995), "Friction Dampers for Seismic Rehabilitation of Casino de Montreal", Proceedings, Seventh Canadian Conference on Earthquake Engineering, Montreal,pp. 943-950.

Wagner, P., Vavak, L., Isakov, P., Pall, R., Pall, A., (1995), "Seismic Rehabilitation of the New Hamilton Courthouse", Proceedings, Seventh Canadian Conference on Earthquake Engineering, Montreal, pp. 951-958.

Godin, D., Poirier, R., Pall, R., Pall, A., "Renforcement Sismique du Nouveau Campus de L'Ecole de Technologie Superieure de Montreal", Proceedings, Seventh Canadian Conference on Earthquake Engineering, Montreal, 967-974.

Pasquin, C., Pall, A., Pall, R., (1994), "High-Tech Seismic Rehabilitation of Casino de Montreal", Proceedings. Structures Congress 1994. American Society of Civil Engineers, Atlanta, April 25-27, Vol. 2, pp. 1292-1297.

Pall, A.S. and Pall, R., (1993), "Friction Dampers Used for Seismic Control of New and Existing Buildings in Canada" Proceedings. Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control, ATC 17. 1, Applied Technology Council, San Francisco, March, Vol.2, pp. 675-686.

Pall, A.S., Vezina, S., and Pall, R., (1993) "Friction Dampers for Seismic Control of Canadian Space Agency Headquarters", SPECTRA, Journal of Earthquake Research Institute, Vol.9, number 3, August, pp. 547-557.

Vezina, S., Proulx, P., Pall, R., and Pall, A., (1992), " Friction Dampers for Aseismic Design of Canadian Space Agency", Proceedings, Tenth World Conference on Earthquake Engineering, Madrid, Spain, July, Vol. 7, pp. 4123-4128.

Pall, A.S. and Pall, R., (1992), " Friction Dampers for Seismic Control of Buildings", Proceedings of C.I.B., Montreal, May, pp. 232-233.

Pall, A.S. and Pall, R., (1991) "Seismic Response of a Friction Base Isolated House in Montreal", Proceedings. Sixth Canadian Conference on Earthquake Engineering, Toronto, June, pp. 375-385.

Pall, A.S., Ghorayeb, F. and Pall, R. (1991) "Friction Dampers for Rehabilitation of Ecole Polyvalente at Sorel, Quebec", Proceedings. Sixth Canadian Conference on Earthquake Engineering, Toronto, June, pp. 389-396.

Wang, S., Marsh, C., Pall, A.S. (1991) "Studies on Friction Base Isolators", Proceedings. Sixth Canadian Conference on Earthquake Engineering, Toronto, June, pp. 359-366.

Pall, A.S., Pall, R. (1991), "Friction Dampers for Seismic Control of Buildings", Proceedings, Canadian Society for Civil Engineering, Vancouver, May.

Pall, A.S., Pall, R., (1990) "Friction Dampers for Economic Seismic Design", Proceedings, Ninth Symposium on Earthquake Engineering, Roorkee, India, December, vol. 1, pp. 4-137 - 4-144.

Pall, A.S. (1989) "Friction Damped Connections for Precast Concrete Cladding", Proceedings, International Conference on Architectural Precast Concrete. PCI, Chicago, November, pp. 300-305.

Pall, A.S. (1989) " Friction Dampers for Economic Seismic Design", Proceedings. ASCE Structures Congress, San Francisco, May, pp. 159-168.

Pall, A.S., Verganelakis,V., Marsh, C., (1989) "Friction Damped Concrete Frames", Proceedings. CSCE / CPCA Congress, Montreal, March, pp. 113-122.

Pall, A.S., Verganelakis,V., Marsh, C., (1989) "Friction Damped Frames for Concordia University Library Building", ASCE Engineering Mechanics Division Specialty Conference, May, Blacksburg, VA, pp. 1 13.

Kelly, J.M., Aiken, 1. D., Pall, A.S., (1988) "Shake Table Tests on a Nine-Storey Friction-Damped Frame", Proceedings. Ninth World Conference on Earthquake Engineering, Tokyo, Japan, August, pp. 156.

Pall, A.S., Verganelakis,V., Marsh, C., (1988) "Friction Damped Frames for Concordia Library Building", Proceedings, Ninth World Conference on Earthquake Engineering, Tokyo, Japan, August, pp. 159.

Kelly, J.M., Aiken, I. D., Pall, A.S., (1988) "Seismic Response of a Nine-Story Steel Frame with Friction-Damped Cross-Bracing", Report No. UCB/EERC-88/17, Earthquake Engineering Research Center, University of California, Berkeley, pp.1-7 (437KB)

Pall, A.S., Verganelakis,V., Marsh, C., (1987) "Friction Dampers for Seismic Control of Concordia University Library Building", Proceedings, Fifth Canadian Conference on Earthquake Engineering, Ottawa, Canada, July, pp. 191-200.

Pall, A.S., (1986) "Energy Dissipation Devices for Aseismic Design of Buildings", Proceedings. Seminar of Applied Technology Council, ATC-17, San Francisco, U.S.A., March, pp. 241-250.

Pall, A.S., (1984) "Response of Friction-Damped Buildings", Proceedings, Eleventh World Conference on Earthquake Engineering, San Francisco, U.S.A., July, Vol. v, pp. 1007-1014.

Pall, A.S., (1983) "Friction Devices for Aseismic Design of Buildings", Proceedings Fourth Canadian Conference on Earthquake Engineering, Vancouver, Canada, June, pp. 475-484.

Baktash, P., Marsh, C. and Pall, A.S., (1983) "Seismic Tests on a Model Shearwall with Friction Joints", Canadian Journal of Civil Engineering, Vol. 10, No. 1, March, pp 52-59.

Pall, A.S. and Marsh, C., (1982) "Response of Friction Damped Braced Frames", Journal of Structural Division, ASCE, Vol. 108, No. ST6, June, pp. 1313-1323, (American Society of Civil Engineer's Raymond C. Research Prize 1983).(665kb)

Pall, A.S. (1982) "Anti-Seismic Devices for Buildings', Proceedings, Seventh Symposium on Earthquake Engineering, Roorkee, India, November, Vol. 1, pp. 215-220.

Marsh, C., Pall, A.S., (1981), "Friction Devices to Control Seismic Response", Proceedings Second ASCF,/EMD Specialty Conference on Dynamic Response of Structures, Atlanta, U.S.A., January, pp. 809-818.

Pall, A.S. and Marsh, C., (1981) "Friction-Damped Shearwalls", ACI Journal, Proceedings, Vol.78, No. 3, May-June, pp. 187-193.

Pall, A.S. and Marsh, C. and Fazio, P., (1980) "A Friction Joint for Seismic Control of Large Panel Concrete Structures", Journal of Prestressed Concrete Institute, Vol. 25, No. 6, December, pp. 38-61

Pall, A.S., Marsh, C., (1980) "Optimum Seismic Resistance of Large Panel Structures Using Limited-Slip Bolted Joints", Proceedings. Seventh World Conference on Earthquake Engineering, Istanbul, September, Vol.4, pp. 177-184.

Pall, A.S., Marsh, C., Fazio, P., (1980) "A Seismic Design of Panelized Building Using Friction Joints", Proceedings, Fifth CIB Symposium, Madrid, Spain, June.

Pall, A.S., Marsh, C., (1979), "Energy Dissipation in Large Panel Structures Using Limited Slip Bolted Joints", Proceedings, AICAP/CEB Seismic Conference, Rome, Italy, May, Vol. 3, pp. 27-34.

Pall, A.S., Marsh, C., (1979) "Seismic Response of Large Panel Structures Using Large Slip Bolted Joints", Proceedings, Third Canadian Conference on Earthquake Engineering, Montreal, Canada, June, Vol. 2, pp. 899-916.

Pall, A.S., Marsh, C., Fazio, P., (1979) "Limited Slip Bolted Joints for Large Panel Structures", Proceedings, Symposium on Behavior of Building Systems and Building Components, Nashville, U.S.A., March, pp. 385-494.